SAFELY REMOVE RUST FROM ENGINE BLOCKS & COOLING SYSTEM

EVAPO-RUST^TM Cooling System Cleaner is a concentrated rust removing formulation based on our 3-TIME AWARD WINNING rust remover technology. EVAPO-RUST^TM Cooling System Cleaner, when used as directed, is non-corrosive to steel and will not harm copper, brass, aluminum, plastic, rubber, silicone, wood or vinyl. EVAPO-RUST^TM Cooling System Cleaner will not remove coatings such as non-oxide paint or chrome that are still bonded to the surface. Not for use with magnesium or magnesium alloys.

For Professional Restoration!

No tear-downs
Fast acting
Easy to use
Professional results

Non-Toxic
Non-Flammable
Non-Corrosive
Biodegradable

TYPICAL PROPERTIES

Appearance Amber, Slightly Viscous
Odor Mild odor
pH @ 1% 6.0 – 7.0
Environmental Data Biodegradable

Instructions For Use:

1) Drain the water/anti-freeze from cooling system.
2) Pour 1 quart (32 ounces) into cooling system for every 2 gallons of water/anti-freeze removed.
3) Add water to cooling system until full.
4) Start engine and allow engine to run with heater on for 1 - 2 hours.
5) Drain (solution should be black) and flush radiator/cooling system. Repeat steps 1 - 5 once more if necessary.
6) Fill cooling system with appropriate anti-freeze/water.

Evapo-Rust Cooling System Cleaner	1 Quart (32 Ounces)	Evapo-RustCSC-c	$18.95	Quantity:

Legal l About l E-mail l Links l News l Products l Home

Evapo-Rust Cooling System Cleaner

MSDS